Hydraulics

Categories

Adapters

Hydraulic Adapters offer a series of fittings to connect dissimilar hoses, pipes, tubes, actuators, pumps and other components. Our Leak Free solutions are strong, versatile and reliable. You can count on them to operate safely and effectively.

Adapter Kits

JIC Plug & Cap Kit

Sizes: # 4 to # 16

O-Ring Face Seal Plug & Cap Kit

Sizes: # 4 to # 20

British Plug Pipe & Cap Kit

Sizes: # 4 to # 16

In Stock

JIC | Boss O-Ring | NPT (National Pipe Thread) | SAE  O-Ring Face Seal | Compression | SAE Flange | BSP (British Standard Pipe) | JIS (Japanese Industrial Standard) | Metric DIN | Kobelco
Metric DIN
O-Ring Face Seal
SAE Flange
Boss O-Ring
NPT (National Pipe Thread)

Couplings

Hydraulic Couplings  offer a series of fittings to connect two similar pipes, hoses, actuators, pumps, tubes and several other components. Our Leak Free solutions are strong, versatile and reliable. You can count on them to operate safely and effectively.

JIC

  • JIC (Joint Industrial Conference or Council)
  • Seated with a 37° flare between the male and female
  • Sizes: ¼” (#4) thru 2” (#32)
  • We also carry these in a long drop 90° female
Boss O-Ring

  • Has the same threads as JIC
  • Sealed with an O-Ring
  • Commonly used with Quick Disconnects and for port connection
  • Sizes:  ¼” (#4)  thru  1” (#16)
NPT

  • NPT (National Pipe Thread)
  • Male and Female rigid threads are tapered for sealing purposes
  • Female swivel have a 60° angle for sealing
  • Sizes:  1/8” (#2)  thru  2” (#32)
SAE

  • SAE (Society of Automotive Engineers)
  • Seated with a 45° flare between the male and female
  • Sizes:  3/8” (#6)  and  ¾” (#12)
O-Ring Face Seal

  • Male and Female are flat faced and sealed with an o-ring
  • Male fitting holds the o-ring
  • Sizes: ¼” (#4)  thru  1 ¼” (#20)
  • We also carry these in a long drop 90° female
Male Inverted Flare

  • Male swivel nut seated with a 45° inverted flare
  • Sizes: ¼” (#4)  thru  5/8” (#10)
Compression

  • Nut, compression sleeve, and male thread fitting to compress onto tubing
  • Made to attach a crimped fitting on a hose to a tube
  • Tube sizes:  ¼” (#4)  thru  1” (#16)
Field Attachable

  • Hose barb with right hand threads and a ferrule with left hand threads can be changed in the field to a new piece of hose
  • Sizes:  3/16 hose to  7/8 hose
Grease Fittings

  • Very fine Female thread : ½”-27 threads per inch
SAE Flange

  • Attachable with split flange clamps and sealed with an o-ring
  • The thickness of the flange is different depending on the size
  • SAE Flange has 3 different sizes: Code 61, Code 62, & Code 62C
    • Code 61
      • Sizes:  ¾” (#12)  thru  2” (#32)
      • We also carry some sizes in a long drop 90°
    • Code 62
      • Sizes:  ¾” (#12)  thru  1 ½” (#24)
      • We also carry some sizes in a long drop 90°
    • Code 62C
      • Sizes:  ¾” (#12)  thru  1 ½” (#24)
      • Flange thickness is the same for all sizes: 0.559 inch
British Pipe

  • BSPT: British Standard Pipe Tapered
    • Male is tapered similar to NPT
    • Male also has a 60° seat
    • Sizes:  ¼” (#4)  thru  1 ¼” (#20)
  • BSPP: British Standard Parallel Pipe
    • Female British pipe swivel is sealed with a 60° seat
    • Sizes:  1/8” (#2)  thru  1 ¼” (#20)
JIS

  • JIS: Japanese Industrial Standard
  • JIS has the same thread as British pipe but is seated with a 60° flare
  • Sizes:  ¼” (#4)  thru  ¾” (#12)
Banjo

  • Attachable with a metric thread bolt
  • Metric Sizes:  12mm, 14mm, and 16mm
Komatsu

  • A metric fitting that is seated with a 60° flare between the male and female
  • Metric Sizes:  14×1.5  (¼” hose)  thru  33×1.5  (1” hose)
Metric DIN Fittings

  • Light Series
    • Thread Sizes:  12×1.5 (Tube Size: 6mm)  thru  30×2.0 (Tube Size: 22mm)
  • Heavy Series
    • Thread Sizes:  14×1.5 (Tube Size: 6mm)  thru  42×2.0 (Tube Size: 30mm)

Guages

Hydraulic gauges are often used in oil, fuel and water systems. The fluid and piping systems need to operate at a set pressure to ensure optimal performance. The Hydraulic gauges are used to measure the pressure in the system, to make sure that no leaks or pressure changes happen that could affect the system.

In Stock

  • We have in stock 0-60 psi up to 0-10,000 psi
  • We have liquid filled stainless steel gauges
  • You can choose from lower mount or center back mount
  • Most common are the 2 1/2″ diameter, we also have some 4″ diameter
  • We also have: service filter, vacuum (-30 to +30psi), and compactor gauges

Hose

Hydraulic Hoses are like rubber Hoses except that they contain a braided stainless steel sleeve inside of its rubber outer covering.The stainless steel allows for the hose to withstand greater amounts of pressure. We offer several types of Hydraulic Hoses, from One Wire to Six Wire Multispiral and others, for a wide range of usage.

One Wire Braid (T1A)

  • SAE 100R1AT
  • Black, nitrile rubber lined core with a one wire high tensile steel braid reinforcement and an abrasion resistant synthetic rubber cover
  • Inside Diameter (I.D.) sizes: ¼ inch to 2 inch
  • Pressure range (from 1/4 inch to 2 inch):  3,250 psi  to  580 psi
  • Temperature range:  -40°F  to  +212°F
Two Wire Braid (T2A)

  • SAE 100R2AT
  • Black, nitrile rubber lined core with a two wire high tensile steel braid reinforcement and an abrasion resistant synthetic rubber cover
  • I.D. sizes: ¼ inch to 2 inch
  • Pressure range (from 1/4 inch to 2 inch):  6,000 psi  to  1,305 psi
  • Temperature range:  -40°F  to  +212°F
Four Wire Multispiral

  • SAE 100R12
  • Black synthetic rubber lined core with a four wire (alternating layers) high tensile steel spiral reinforcement and an abrasion resistant synthetic rubber cover
  • I.D. sizes: 3/4 inch to 2 inch
  • Pressure range (from 3/4 inch to 2 inch):  5,100 psi  to  3,050 psi
  • Temperature range:  -40°F  to  +250°F
Six Wire Multispiral

  • SAE 100R13
  • Black synthetic rubber lined core with a six wire (alternating layers) high tensile steel spiral reinforcement and an abrasion resistant synthetic rubber cover
  • I.D. sizes: 3/4 inch to 2 inch
  • Pressure range (from 3/4 inch to 2 inch):  5,100 psi  to  5,100 psi
  • Temperature range:  -40°F  to  +250°F
HSHA 6,000 PSI Hose

  • Black synthetic rubber lined core with a four wire (alternating layers) high tensile steel spiral reinforcement and an abrasion resistant synthetic rubber cover
  • I.D. sizes: 3/4 inch to 1 inch
  • Pressure range (from 3/4 inch to 1 inch):  6,300 psi  to  6,000 psi
  • Temperature range:  -40°F  to  +212°F
Jack Hose

  • Black, nitrile rubber lined core with a two wire high tensile steel braid reinforcement and an extra abrasion resistant synthetic rubber cover
  • “FRAS” Flame Resistant and Anti-Static
  • Inside Diameter (I.D.) size: ¼ inch
  • Maximum working pressure:  10,000 psi
  • Temperature range:  -40°F  to  +120°F
Thermoplastic (Synflex) Hose

Single Line

  • SAE100R7
  • Thermoplastic (Nylon) core with braided synthetic (Nylon) yarn reinforcement and a thermoplastic (Polyurethane) cover that is oil and abrasion resistant 

Twin Line

    • SAE100R7
    • Thermoplastic (Nylon) core with braided synthetic (Nylon) yarn reinforcement and a thermoplastic (Polyurethane) cover that is oil and abrasion resistant
    • Commonly used on the mast of forklifts
    •  I.D. sizes: ¼ inch to ½ inch
    • Pressure range (from ¼ inch to ½ inch):  2,750 psi  to  2,000 psi
    • Temperature range:  -40°F  to  +203°F
  • Commonly used on the mast of forklifts
  •  I.D. sizes: ¼ inch to ½ inch
  • Pressure range (from ¼ inch to ½ inch):  2,750 psi  to  2,000 psi
  • Temperature range:  -40°F  to  +203°F
Non-Conductive Thermoplastic Hose

Single Line

  • SAE100R7
  • Thermoplastic (Polyester) core with braided synthetic (Polyester) yarn reinforcement and a thermoplastic (Polyurethane) cover that is oil and abrasion resistant
  • Commonly used for electrical non-conductivity applications
    • Example:  bucket trucks, and man lifts
  •  I.D. sizes: ¼ inch to ½ inch
  • Pressure range (from ¼ inch to ½ inch):  2,750 psi  to  2,000 psi
  • Temperature range:  -40°F  to  +203°F

Twin Line

  • SAE100R7
  • Thermoplastic (Polyester) core with braided synthetic (Polyester) yarn reinforcement and a thermoplastic (Polyurethane) cover that is oil and abrasion resistant
  • Commonly used for electrical non-conductivity applications
    • Example:  bucket trucks, and man lifts
  •  I.D. sizes: ¼ inch to ½ inch
  • Pressure range (from ¼ inch to ½ inch):  2,750 psi  to  2,000 psi
  • Temperature range:  -40°F  to  +203°F
Stainless Steel Teflon Hose

  • SAE100R14
  • Teflon (PTFE) core with one braid of high tensile
    stainless steel wire reinforcement
  • I.D. sizes: ¼ inch to ¾ inch
  • Pressure range (from ¼  inch to ¾ inch):  2,450 psi  to  800 psi
  • Temperature range:  -76°F  to  +500°F
Push-On Hose

  • Textile braid hose
  • Black, nitrile rubber lined core with a textile fiber braid reinforcement and an oil resistant synthetic rubber cover
  • I.D. sizes: ¼ inch to ¾ inch
  • Pressure range:  300 psi for all sizes
  • Temperature range:  -40°F  to  +190°F
Trucker (Stratoflex) Hose

  • SAE 100R5
  • Black, nitrile rubber lined core with a polyester inner braid and one high tensile steel wire braid reinforcement and a black polyester braid cover
  • I.D. sizes: 3/16 inch to 1 3/8 inch
  • Pressure range (from 3/16 inch to 1 3/8 inch):  3,050 psi  to  500 psi
  • Temperature range:  -40°F  to  +212°F

Lubrication

Hydraulic Lubrication is supplied by our Hydraulic Oils which are a special type of oils. They are not only used as lube, but also the oil is used to power hydraulic systems for all types of applications. Hydraulic Lubrication makes it possible to move heavy or resistant objects with ease.

AW 32 2K

  • ISO 32
  • Contains anti-wear additives along with rust, oxidation and foam inhibitors
  • A 10 weight hydraulic oil
  • 2,000 hour oil
  • Sold in 5 gallon pails
AW 46 2K, 2 Gallon

  • ISO 46
  • Contains anti-wear additives along with rust, oxidation and foam inhibitors
  • A 20 weight hydraulic oil
  • 2,000 hour oil
  • Most universally used hydraulic oil
AW 46 2K, 5 Gallon

  • ISO 46
  • Contains anti-wear additives along with rust, oxidation and foam inhibitors
  • A 20 weight hydraulic oil
  • 2,000 hour oil
  • Most universally used hydraulic oil
AW 68 2K

  • ISO 68
  • Contains anti-wear additives along with rust, oxidation and foam inhibitors
  • A 30 weight hydraulic oil
  • 2,000 hour oil
  • Sold in 5 gallon pails
AW 100 6K

  • Male and Female are flat faced and sealed with an o-ring
  • Male fitting holds the o-ring
  • Sizes: ¼” (#4)  thru  1 ¼” (#20)
  • We also carry these in a long drop 90° female
Red Non-Conductive Oil
  • Rozep 5W20 35KV
  • Non-Conductive up to 3,500 volts
  • Red die used for leak detection
  • A 32 weight oil
  • Premium 6,000 hour oil
  • Commonly used in Bucket Trucks for working around power lines 
  • Sold in 5 gallon pails
Tractor Transmission (J20C)

  • Tractor transmission oil
  • Specially formulated with a Tractor Package for wet brake & clutch applications
  • Sold in 5 gallon pails
JB 80

  • Penetrating oil

Grease

Grease Guns & Z Swivels

Porta Power Jacks

Porta Powers Jacks are used for automotive, truck, farm and heavy equipment repair, they can be used to straighten, bend or modify any metal that requires hydraulic power.

Hand Pumps

Available in several models for different applications:

Single Acting: Single Speed/Two Speed
Double Acting: Two Speed

Cylinders

Single and Double Acting

Pneumatic Treadle Pumps

Available from 91.5 in³ to 460.6 in³ reservoir sizes

Foot Operated
Designed for single acting cylinders

Spreaders

Protectant

Nylon Hose Sleeve

Plastic Wrap

Quick Couplers

Quick couplers are similar to Hydraulic Couplers. Quick Couplers are faster and easier to connect because they don’t require to be screwed. They are made so that switching between tools doesn’t result in loss of compression, as it can happen with tools needed to be screwed on.

Agricultural & General Purpose Applications

Used on farm equipment and general contractor applications

Industrial/Contractor Applications

Designed for higher pressure than general purpose quick connects

Flush face is designed for minimal spillage

Industrial/Contractor Applications: Bulkhead Thread

Higher pressure with minimal spillage

Bulkhead thread design mounts to a plate providing easy access for attachments

Commonly found on skid loaders and excavators

High Impulse Applications

Designed for very high pressure applications and high impulse applications

Commonly found on shear and hammer attachments

Test Port Couplings

Provides a convenient connection for testing pressure, temperature, and other diagnostics

Trucking Industry

Provides and easy connection between tractor and trailer on wet kits

Porta Power

10,000 psi application

Used for connecting porta power jacks

© 2023 Alan Hydraulics & Machinery Co. Inc.
Website by Public Alliance
  • About Us
  • Services
  • Products
    • Accessories
    • Air
    • Air Conditioning
    • Fuel
    • Hydraulics
    • Industrial
    • Water
  • Contact Us
Facebook
Newsletter Sign Up
Search
  • About Us
  • Services
  • Products
    • Accessories
    • Air
    • Air Conditioning
    • Fuel
    • Hydraulics
    • Industrial
    • Water
  • Contact Us
Facebook
Newsletter Sign Up
Search